PAD PRINTING SOLUTIONS

Print distortion is often a problem when printing deep or curved surfaces.

Possible causes and solution of blurry printing and blurring of lines and texts.

Generally due to static load on the material, improper buffer shape or paint fluidity.

This problem is usually observed on the pad surface before printing on the pad material.

The appearance of drying spots is usually caused by the dried paint coming into the image area of the printing block.

It is a problem that is usually encountered when printing only on dark colored materials.

It is usually seen when the type of product being printed is unknown or the wrong type of ink is used.

It is a problem caused by the colors not being positioned correctly in CMYK printing.

If the pores are large and generally in the same area, it should be checked whether the bumper and plate are damaged.

It usually occurs when the ink is too thin or the pad slips during printing.

Occurs when the pad takes the ink from the plate but cannot transfer it onto the printing material.

It can generally be seen in printing on large surfaces and similar situations.

In multi-colour rapid prints, the next printing pad may remove the previous color.